Choosing the Right Clamps to Get the Job Done

The first thing you need to do in order to accomplish any task or work on any project is get the right tools. One of those tools that you need are clamps to hold your pieces together while you’re trying to put them together. These clamps, however, are varied and come in a range of different styles and purposes as well. You want to make sure that you are using the right tools at each time so you’re ready to make sure your project is going to turn out right.

C-Clamps

These clamps are used for gluing and clamping different pieces of wood. You’ll be able to hold them tightly together because you can wrap the clamp all the way around the pieces and you’ll be able to easily spin the crank to get a tighter and tighter clamp. This allows you to set the level that you use rather than other types of clamps which may have an automatic level of tightness around an object. You’ll be able to get different sizes of these clamps as well and they range from small to moderate and even large sizes for any type of project you might have.

Pipe Clamp

Clamps1This type of clamp is able to be individually adjusted and you’ll easily be able to clamp it down to create a great deal of pressure. It is used by spinning the crank to tighten it down as much as you need. You can use it for a number of different projects and you’ll be able to stretch it out as long as you like, or at least as long as your pipe is. This means that you can hold together larger pieces of wood with no problems. You can even create your own pipe clamps and extend it as much as you want.

Deep Throat Bar Clamp

With this clamp you’re going to have a smaller and more portable clamp to use. You don’t get quite as much distance or size and you’re also not going to have quite as much pressure and support, but you’ll definitely be able to get a good amount of pressure and you can use them for some smaller projects. You’ll be able to hold together woodworking projects and you’ll be able to get some repair projects completed at the same time. It’s going to make just about any project a whole lot easier.

Handscrew Clamps

With these clamps you’re going to have more capability to hold together different types of items. These clamps actually look pretty cool and they’re easy to use as well. They provide an offset clamp rather than a steady and solid one that you might find on a traditional clamp. You’ll be able to get several different sizes, actually a total of 12 different sizes that range from series of 4 inches to 24 inches. That means you’re going to have a whole lot of freedom to get things done with different sizes.

One-Handed Bar Clamps

These are the easiest clamps to use and to get ahold of. You just put the clamp on both sides of an object and then squeeze the grip in order to get a tighter clamp or a looser one. These are only available in a few different sizes but you’ll be able to get a lot of work out of them no matter what you’re trying to do. You’ll also be able to use them very easily, which is important for most people who are getting started with different woodworking and other types of projects.

Spring Clamp

Clamps2This type of clamp is much smaller and you’re not going to get quite as much use out of it if you’re looking at larger projects. Still, you can connect pieces together with the small handhold clamp. You’ll be able to attach them to any small repair or smaller item that you need to hold together. These are also going to be very inexpensive so you’ll be able to pick up several of them to use for your next project and you’ll be able to use them even for simple tasks like holding up plastic sheeting or anything else you might need.

Ratchet-Action Band Clamp

This is not exactly a clamp, but it’s going to give you a lot of pressure and without specific pressure points around your objects. You’ll wrap the band around the objects you want to pull together and then ratchet them tightly together to make sure that they’re going to stay firmly together. Instead of one or two specific pressure spots from the clamps you’re going to have a full amount of pressure evenly around the objects to keep them tightly wound and ready for anything else you need to use them for in your work.

If you’re looking to do a lot of different projects you’re going to want to look at several different types of clamps. It’s going to be a whole lot easier to get your job done if you have an assortment to choose from because you can decide which clamps are going to do each job the best possible way. You want to make sure that you’re paying attention to the capabilities of your clamps however, because that’s how you’re going to get the best work out of them and the best quality out of your project in the end.

Make sure you’re looking at each of these clamps and looking for several different options when it comes time to do your next project. You’re going to want to look at each of these clamps and different sizes of each one as well. At that point, you’re going to see what it takes to get the project going. So enjoy your project and make sure that you’re doing it the right way. You’ll definitely be excited when you see how well it’s all done at the end and you’re definitely going to enjoy the outcome. So take some time to look things over and start on your next project with the perfect clamps to go yet again.

Leave a Reply